Enquire now
Enquire NowCall Back Whatsapp Lab report/login
Understanding Laser Stone Operations: Types of Rays Used

Home > Blogs > Understanding Laser Stone Operations: Types of Rays Used

Understanding Laser Stone Operations: Types of Rays Used

General Surgery | by CMRI | Published on 01/04/2020



Introduction

Lithotripsy is a procedure reshaping the sphere of kidney stone management. The lithotripsy procedure is one of the most common urological interventions and offers a minimally invasive solution to those suffering from kidney stones. It disintegrates stones into smaller fragments by employing focused shock waves facilitating their passage through the urinary tract with decreased discomfort. This procedure is hugely adopted across the globe and is a transformative option for people struggling with recurrent kidney stones, giving faster recovery times and reduced risks compared to conventional surgical methods.

If you are looking for the best nephrologist in Kolkata for a lithotripsy procedure, then book your appointment with CMRI. You will find the best and most highly experienced health experts here ensuring successful procedures with safety.

In this blog, you can explore how lithotripsy brings comfort and renewed hope to people struggling with kidney stone disease. However, please note that this blog is for informative purposes only and does not replace the consultation of a doctor.

What is lithotripsy?

Lithotripsy, also called lithotripsy, is a medical procedure that uses a laser or high-energy shock waves to break stones in the kidney, gallbladder, or ureter. Once the stone is broken, the remaining particles are flushed out of the body while urinating. Stones in the kidney, gallbladder, or ureter, are a common phenomenon. Some stones are small enough and pass on their own, while for others, medical intervention may be required because of their size. Large stones cause a lot of pain and also block the flow of urine; thereby, treatment becomes an immediate requirement.

What are the types of Lithotripsy?

There are two types of lithotripsy used for stone operations, including:

  • Extracorporeal Shock Wave Lithotripsy (ESWL)
  • Flexible Ureteroscopy and Laser Lithotripsy (FURSL)

Both operations treat stones effectively; the usage of one over the other depends on the overall health of a person and the type of stone.

Extracorporeal Shock Wave Lithotripsy (ESWL):

This method of treatment of stones uses high-frequency shock waves to break down the stones. In this operation, an instrument known as a lithotripter is used to direct sound waves or focus ultrasonic energy directly at the stones, causing them to break into smaller pieces. These high-frequency sound waves only affect the stones and do not cause any harm to the surrounding organs and tissues. The shock waves travel into the body from the skin and tissue, breaking stones into smaller pieces. Post the operation, the broken smaller pieces are eventually passed through urine over several days or weeks. The stone operation is about an hour long with a short hospital stay and quick recovery time. This allows patients with certain types of stones in the body to avoid invasive surgery to remove stones. 

Flexible Ureteroscopy and Laser Lithotripsy (FURSL):

This surgical treatment involves using an endoscope – a flexible, thin tube with a light and high-definition camera mounted on top of it – to see inside the impacted organ and reach the stones. Thereafter, the laser is used to break the large stone into smaller pieces, allowing them to pass through the urine in the following days and weeks. The surgery time is approximately 30 minutes, and the patients are discharged on the same day, as well as the recovery time is short, with average people returning to their normal activities within a week or two.

How does lithotripsy work?

Stones are hard masses of tiny crystals formed due to excessive accumulation of certain minerals in the body and lack of fluids to dissolve the minerals. These minerals include calcium, oxalate, and uric acid. When the concentration of these minerals in the body exceeds a certain level, and there is not enough presence of fluids to dissolve these minerals – stones are formed.

Apart from this, some other factors such as poor diet, severe diarrhea, excessive weight, family history, or certain medicines can also cause the formation of stones.

Stones are generally brown or yellow and have a smooth, as well as a rough texture. These can be the size of sand, gravel, pearl, or even bigger and are usually painful since they block the flow of urine. In certain cases, people do not even realize the presence of stones unless they start to stir and move, causing discomfort and pain.

However, if stones do not pass on their own, they can cause immense damage to the kidneys and urinary tract. Thus, when medications fail to flush out stones, a laser technique may be used to break down the stone into small pieces, allowing it to pass through.

What does the preparation for lithotripsy look like?

Before any lithotripsy, the doctor will determine the number of stones, the size, and the location of the stones in the body. This is done by injecting a dye into a vein to conduct an intravenous pyelogram (IP) to help locate the stones in the body. The injected dye travels through the bloodstream into the kidneys, ureter, and bladder, highlighting the stones as dark spots in an X-ray.

Certain points should be kept in mind before the surgery, such as:

  • Inform the doctor about any ongoing medication, especially blood thinners, and painkillers
  • Stop smoking several days before the surgery
  • Before the lithotripsy procedure, the patient has to undergo certain imaging tests, such as X-rays or ultrasound, to precisely locate and identify the size and number of kidney stones
  • Various forms of anesthesia may be employed depending on the type of lithotripsy being performed and the patient's preference or medical condition. 
  • The surgery is done under anesthesia which implies there needs to be fasting of 8 to 12 hours before the surgery
  • Surgery can cause some nausea and drowsiness; hence all arrangements for commuting and care should be made before the surgery
  • Do not drive back after the operation. Instead, ask someone to pick you up and take you home from the hospital
  • Take enough rest and avoid any physical activity at least for 2-3 days. Even after this duration, if you do not feel energetic enough to take on normal routine activities, take some more rest
  • Drink a lot of water after the procedure and in the weeks to follow after the operation. Overall, maintain the quantity of 8 glasses of water each day
  • Take all medications as suggested by the doctor even if you tend to feel fine. Completing the full course is essential 
  • Eat less salt
  • Reduce foods that are high in calcium
  • Drink fluids such as lemonades (without sugar) eat lemons and organs
  • Do not consume a lot of protein, eat lean meats instead
  • Opt for a low-fat diet
  • Avoid alcohol
  • Avoid calcium supplements for some time and seek advice on when to restart the doses
  • Avoid high doses of vitamin C supplements
  • Visit the doctor on all appointments as suggested

What happens during the lithotripsy procedure?

During a lithotripsy procedure, that is majorly employed for the treatment of kidney stones, various key steps are followed:

  • After the patient is properly anesthetized, they are placed on a treatment table in a way that optimizes access to the targeted kidney stones. The positioning of a patient involves lying on their back or stomach, depending on the location of the stones within the urinary tract.

  • The lithotripsy machine generates high-energy sound waves, that is externally (extracorporeal shock wave lithotripsy - ESWL) or (intracorporeal lithotripsy). In ESWL, a device called a lithotripter is placed outside the body and guided toward the kidney stones. These shock waves are centered and instructed accurately at the targeted stone to scrap them into smaller pieces.
  • After the shock waves reach the kidney stones, they break the stones apart into smaller fragments. This fragmentation process happens slowly throughout the procedure, with the intensity and duration of shock wave application amended depending on the size and stone composition.
  • After fragmentation, the smaller stone fragments are either spontaneously removed from the body by urinating or, in some cases, may require additional treatments. These interruptions involve the use of a recovery basket to remove bigger fragments or the implantation of a stent to assist passage.
  • The patient's vital signs and overall condition are controlled closely by the healthcare team to guarantee safety and efficacy. After the procedure, patients might have to undergo imaging tests, such as X-rays or ultrasound, to ensure the successful passing of kidney stones. In addition, patients have to follow instructions as part of post-procedure care that includes hydration, pain management, and dietary changes to reduce the risk of stone recurrence.

What to expect after the lithotripsy procedure?

After lithotripsy, patients can experience mild discomfort or bruising in the treated area. Stone fragments are passed through urine causing temporary urinary urgency or discomfort. It's critical to stay hydrated to make it easier for stone particles to pass. Pain medication is recommended to manage any discomfort. Patients are usually recommended to resume normal activities slowly and include a diet rich in fluids to avert stone recurrence. Follow-up appointments should be ensured to track recovery and evaluate stone clearance.

What are the complications of the lithotripsy procedure?

Possible complications that you will witness post-surgery but need not be panicked about: 

  • Light-headedness
  • Blood in the urine for the first few days
  • Extreme pain in the back and flank
  • Bruising on the skin

Conclusion

Lithotripsy procedure is identified as a keystone in the treatment of kidney stones, providing a minimally invasive and extremely proficient solution to minimize urinary tract obstruction. With its efficiency in breaking stones into smaller pieces and facilitating their clearance through shock waves, lithotripsy offers patients relief from symptoms and enhances overall quality of life. While mild discomfort and stone passage can be experienced post-procedure, right hydration, and follow-up care are important for optimum recovery. Lithotripsy illustrates an important tool in the extensive management of kidney stone disease.

Faq - 

 

Is lithotripsy painful?

Lithotripsy might lead to mild discomfort, but anesthesia is usually employed to reduce pain during the procedure.

Is lithotripsy safe?

Lithotripsy procedure is often considered safe, with fewer risks when performed by highly skilled and experienced healthcare professionals.

What is shock wave lithotripsy?

Shock wave lithotripsy is a non-invasive procedure that involves the use of shock waves to break kidney stones into smaller pieces for simpler passage.

Can lithotripsy be used for gallstones?

No, lithotripsy is not usually used for gallstones; other options such as surgery (laparoscopic cholecystectomy) or medication are more common. However, extracorporeal shockwave lithotripsy for gallstones is involved sometimes because of high recurrence rates, it has been also known to be effective in some cases. 

What is laser lithotripsy?

Laser lithotripsy is a minimally invasive procedure involving the use of laser energy to break up kidney stones into smaller fragments for removal.

Can lithotripsy be used on stones in the ureter?

Yes, lithotripsy can be involved in the treatment of stones lodged in the ureter, usually through a procedure called ureteroscopic lithotripsy.